Articles in this section
Category / Section

Tenda 4G Router Setup

Published:
  1. Reset the router by pressing and holding for 10 seconds the small black button which is located on the
    back of the router

  2. Connect your laptop / PC to the router using a RJ45 cable

  3. Open a web browser ( Chrome, Mozilla, Safari…)

  4. Type 192.168.0.1 on the search bar and press enter

    image.png

  5. Enter a login password (This is a password for the router interface,make sure its different from the Wifi password)

    image.png

  6. Wait for the router to pick up the sim config and then press Next

    image.png

  7. Set WIFI SSID and PASSWORD

    image.png

  8. Click on More

    image.png

  9. Log in again using the Router Password that you set earlier

    image.png

  10. Lastly check if there is a 4G connection and if you have a WAN IP

    image.png

Access denied
Access denied