Category / Section
Peplink MAX UBR LTE Router Setup Guide
Published:
How to Use Peplink MAX UBR LTE Routers
- Connect the 4x Cellular Antennas to the Cellular Antenna Connectors on the front panel of the Pepwave router.
- Connect the 2x Wi-Fi Antennas to the Wi-Fi Antenna Connectors on the front panel of the Pepwave router.
Cellular Antennas and Wi-Fi Antennas are different, they can be differentiated from the signage on the antennas and the shape of the connector ports.
- Connect the power adapter to the power connector on the rear panel of the Pepwave router, and then plug it into a power outlet.
- Wait until all the LEDs indicated are green: Status, Wi-Fi, Cellular. This can take up to 5 - 10 minutes.
- Note, you can put in total 4 sim cards at the same time, 1A and 2A will work as priority, 1B and 2B will be operate as backup when the previous 2 failed)
- Then you can connect your device to the Wi-Fi with the SSID and password that is marked on the router.
