Category / Section
Peplink MAX BR1 Pro 5G Router Setup Guide
Published:
How to Use Peplink MAX BR1 Pro 5G Routers
- Connect the 4x Cellular Antennas to the Cellular Antenna Connectors on the front panel of the Pepwave router.
- Connect the 2x Wi-Fi Antennas to the Wi-Fi Antenna Connectors on the front panel of the Pepwave router.
Cellular Antennas and Wi-Fi Antennas are different, they can be differentiated from the signage on the antennas and the shape of the connector ports.
- Connect the power adapter to the power connector on the rear panel of the Pepwave router, and then plug it into a power outlet.
- Wait until all the LEDs indicated are green: Status, Wi-Fi, Cellular. This can take up to 5 - 10 minutes.
- Then you can connect your device to the Wi-Fi with the SSID and password that is marked on the router.
