4. Creating Image - Option 2 Backing up to the Network

1. Set the device bios to boot to the bootable media, or use the relevant bios key on the keyboard of the device that needs to be backed up

This is usually done by pressing F9 on HP’s and F12 on DELL’s and Lenovo’s

2. Select “Backup” in the menu on the left panel and choose “Disk Backup”

3. Add the source disk (this is from the device that needs backing up)

Be aware to choose the correct source disk to backup

4. Choose the network share destination (the network location you want to save the backup to), e.g., \172.20.0.150\nvme (\server ip\share)

Instead of choosing a local path, choose Add Share or NAS Devices

5. Select the appropriate destination on the network share drive and click “OK” then “Start Backup” on the proceeding window

Now, a 1:1 image of the device will be backed up to the destination. This image can be used for future deployment to other devices